STBbrackets Logo

Product List

VESA Floor Stand for LG, SAMSUNG, SONY using Bang & Olufsen stand

Order Code Price  
VESA 7-32 - 200 adapter - for BV7 32 MFS £216.00   BUY 
VESA 7-32 - 300 adapter - for BV7 32 MFS £240.00   BUY 
BeoSound Stage Adapter - Single Pole Stand £180.00   BUY 

VESA Adapter BeoVision 7 32


Mount LG and non-B&O TV to your Bang & Olufsen stand or wall bracket with this solution.

Designed for use with all Floor stand & Table stands for BeoVision 7 32, BeoVision 6 26 & BeoCenter 6 26. This adapter can also be used with Bang & Olufsen original wall brackets for these TV's.  The motor turn function will not work and cannot be made to work.

VESA 7-32 - 200 adapter for LG 55c9 & LG 65c9 
This VESA adapter is for all VESA 200 x 200 and VESA 300 x 200 Televisions with M6 screws. Our VESA conversion for BeoVision 7 32 stand has a range of 10 mounting positions. The range of vertical adjustment is 237mm. This adjustment is needed because TV manufacturers use different heights for the VESA mount on the rear of the TV. Our stand interface is screwed to the mounting plate at one of the ten positions.

Designed for LG55c9 & LG65c9 and TVs with VESA 200x200 or 300x200 rear mount.

VESA 7-32 - 300 adapter 
This VESA adapter is for all VESA 300 x 300 Televisions with M6 screws. Our VESA conversion for BeoVision 7 32 stand has a range of 10 mounting positions. The range of vertical adjustment is 237mm. This adjustment is needed because TV manufacturers use different heights for the VESA mount on the rear of the TV. Our stand interface is screwed to the mounting plate at one of the ten positions.

Designed for TVs with VESA 300x300 rear mount.

We recommend that the bottom of the TV should be approximately 550mm from the Floor. (Y = 550mm)

'X' is the distance from the bottom of your TV to the lowest VESA hole

When you know 'X', you can see the best mounting position for your VESA TV (Positions A – J) by looking at the table.

When you know the correct mounting position, A - J, the two parts of the conversion can be assembled by looking at the image below.

BeoSound Stage Adapter - Single Pole Stand

This interface is used to mount BeoSound Stage to your existing BeoVision 7 32 Motor Floor Stand. The height of the speaker can be adjusted to any position with our variable clamp system.